Testing and Tagging is the process of inspecting and testing all in service electrical equipment for personal safety. Each year hundreds of lives are saved due to timely testing and tagging of electrical equipment. This not only helps in saving lives, but also can reduce the risk of lengthy insurance claims in the event of a tragedy.


Fire Extinguisher tests need to be done at least every 6 months. Fire Extinguishers are the easiest and fastest way of protecting you and your business when a fire occurs. Smoke alarms are now mandatory in dwellings across most Australian states, with reports that they can reduce house fire deaths by up to 60%., It’s critical to regularly get your smoke alarm and fire extinguishers tested properly.


Even if you know where all the exits are located and all the emergency & exit lights seem to be in working order, regular testing and maintenance is the only way to minimise the risk of faulty emergency & exit lights in an emergency situation. Emergency & exit light testing is a 6-monthly legislative requirement,, which will ultimately help to increase the safety for employees and clients in your workplace.


Whenever a microwave oven is turned on, radiation energy is produced causing the water in food to vibrate rapidly. This rapid vibration produces heat, which in turn cooks the food. The energy produced by a microwave oven can also penetrate through living tissue which is why exposure is harmful to our health.


An RCD (Residual Current Device) is the industry term for a safety switch. An RCD’s main purpose is to prevent severe electrical shocks from occurring. An RCD acts as a life saving device; it detects and halts the power in an electrical socket preventing dangerous electric currents and fatal electric shocks. RCD’s are usually located on a switchboard but can be used portably. Every home and workplace should enlist in regular RCD safety switch testing to ensure they are working correctly.


At Jim’s Test & Tag, our technicians provide earth fault loop impedance test services, designed to test the electrical earth of all power points and electrical installations and discover any faults within your electric circuit. In order to ensure you and your employees’ safety and the accuracy of our earth fault loop test results, we will also always test the power point we use for our portable appliance tester when we provide our other testing and tagging services.


Test and Tag Sunshine Coast

We all depend on electricity. It makes so many things possible in our world and we would arguably be a lot less well off without it. While electricity is by no means a new asset that we are just coming to terms with, the danger of complacency when working with electrical goods is something that we must remain vigilant about. Read More

Sunshine Coast Test and Tag Professionals

The fact that we are used to it does not lessen the impact that it can have when faults arise. If you are facilities or office manager and require test and tag services on the Sunshine Coast, then there is a reliable team ready to visit your premises today.

Here at Jim’s Test and Tag, we respect the power of electricity and understand how best to safeguard the tools and equipment that we use every day so that we gain the greatest possibilities to profit from it. We take a rigorous approach when we check your electrical equipment to ensure that it is working as it should and that any risks of fault are properly addressed.

We fully understand that the presence of specialist electrical tester may be viewed as a disruption to your day. However, consider the alternate possibilities in this regard. Our service makes it possible for you and your workers to do what you do best, without having to worry about the safety of your equipment, and the harm that a fault could cause.

How to Eliminate Electrical Accidents That Are Waiting to Happen

At Jim’s Test and Tag, we believe that an undetected electrical fault is potentially lethal. Your responsibility to safeguard the wellbeing of your workforce and the duty of care you are expected to deliver make it essential to schedule regular electrical testing.

We have heard plenty of stories about faults arising in the wake of electrical equipment being tested, only to learn thereafter that an unqualified person carried out the inspection. While there are plenty of people out there that understand a lot about electrical products, our team have undergone significant training that specifically addresses all of the areas that need to be tested against.

Sunshine Coast businesses that require test and tag can avail of a free, no-obligation quote just by getting in touch with us today. We are the go-to team that countless Australian organisations turn to every single day because we have earned a reputation for our thorough, dependable service.

If you want to eliminate electrical accidents that are waiting to happen but that you simply cannot see, then seeking out professional assistance is the best action to take. We handle the due diligence in terms of inspection, testing and tagging, and we will keep you fully informed of our results.

Prevention is Our Number One Priority

Here at Jim’s Test and Tag, we believe that knowledge is power. As such, we not only use the considerable knowledge that we have gained over our decade in the industry to identify risks in your workplace, but we also help you understand where gaps are and can provide you with the remedies. Prevention is our number one priority and we are committed to the clients that we work with.

We can provide you with a handy reminder service that will ensure you are in full compliance at all times. On our schedule, you will always have faith in the electrical equipment on your premises. So, for the best test and tag professionals on the Sunshine Coast, look no further than the team at Jim’s Test and Tag.

Jim’s Test and Tag provides RCD & Fault Loop testing in Sydney, Melbourne, Perth, Hobart, Brisbane, Adelaide, Gold Coast as well as regional across Australia.

Read Less

Our Personnel

We’ve spent over 10 years in this business. We’ve taken this time to perfect our craft and to this day we continue growing and expanding. Our staff is technically trained and is able to keep our clients informed with their testing and tagging as we complete their inspections.

Why Choose Us?

Choosing a service provider shouldn’t be a daunting task, as long as you have a provider with a knowledgeable staff and a reputation you can trust. When tasked with testing and tagging, it’s important to use a service provider with the skill and equipment to ensure passing inspection. Jim’s Test & Tag has been a leading expert in this field for over 10 years and strives to provide you with the most comprehensive and efficient service.