Testing and Tagging is the process of inspecting and testing all in service electrical equipment for personal safety. Each year hundreds of lives are saved due to timely testing and tagging of electrical equipment. This not only helps in saving lives, but also can reduce the risk of lengthy insurance claims in the event of a tragedy.


Fire Extinguisher tests need to be done at least every 6 months. Fire Extinguishers are the easiest and fastest way of protecting you and your business when a fire occurs. Smoke alarms are now mandatory in dwellings across most Australian states, with reports that they can reduce house fire deaths by up to 60%., It’s critical to regularly get your smoke alarm and fire extinguishers tested properly.


Even if you know where all the exits are located and all the emergency & exit lights seem to be in working order, regular testing and maintenance is the only way to minimise the risk of faulty emergency & exit lights in an emergency situation. Emergency & exit light testing is a 6-monthly legislative requirement,, which will ultimately help to increase the safety for employees and clients in your workplace.


Whenever a microwave oven is turned on, radiation energy is produced causing the water in food to vibrate rapidly. This rapid vibration produces heat, which in turn cooks the food. The energy produced by a microwave oven can also penetrate through living tissue which is why exposure is harmful to our health.


An RCD (Residual Current Device) is the industry term for a safety switch. An RCD’s main purpose is to prevent severe electrical shocks from occurring. An RCD acts as a life saving device; it detects and halts the power in an electrical socket preventing dangerous electric currents and fatal electric shocks. RCD’s are usually located on a switchboard but can be used portably. Every home and workplace should enlist in regular RCD safety switch testing to ensure they are working correctly.


At Jim’s Test & Tag, our technicians provide earth fault loop impedance test services, designed to test the electrical earth of all power points and electrical installations and discover any faults within your electric circuit. In order to ensure you and your employees’ safety and the accuracy of our earth fault loop test results, we will also always test the power point we use for our portable appliance tester when we provide our other testing and tagging services.


Test and Tag South Australia

We are all familiar with the term ‘wear and tear’. It applies across the majority of areas in our lives and most importantly to electrical equipment and products. The problem is, where many accessories and products in our world are susceptible to wear and tear, a sudden failure does not have serious consequences. With electrical products the inverse is true. Read More

The Best Test and Tag Service in South Australia

Nobody doubts the power of electricity, and so, if you want to ensure that the products, tools and equipment you use every day are in good working order, book the test and tag professionals your South Australia neighbours always trust.

At Jim’s Test and Tag, we have served residents, facilities managers, site managers and property owners throughout the entire country. With a decade delivering the best service available under our belts, we continue to grow our service and welcome new franchisees into the fold. Our standards are rigorously high, given that our brand is one of the most well-respected and trusted in Australia, so you can depend on the local professionals that arrive at your premises to live up to the high-quality expectations that we have.

Our goal is to prevent accidents from happening. We undergo continuous training and education to make sure that we are at the cutting edge of risk assessment and negation. Furthermore, we are committed to ensuring that our clients are fully compliant with the prevailing laws and regulations.

Test and Tag Secrets to a Safe Workplace in SA

If you own a business that has many employees, or even just one, then you appreciate that your duty of care means that you must provide a safe workplace for them. Regardless of the nature of the business that you conduct, it is always advisable to retain professional assistance when undertaking any safety and risk assessments in the workplace.

Here at Jim’s Test and Tag, we appreciate that in some instances, those that are directly involved in the manufacture or supply of electrical products or have some advanced knowledge of the industry may feel that they are perfectly capable of delivering the highest standards without outside assistance. However, the problem is that familiarity can cloud judgement.

You may be more inclined to note the need for a change only to then start work on another project. Our test and tag service in South Australia is a means for you to delegate this crucial work to an outside party that can provide an objective opinion. What’s more, with all identified risks being noted to you, with recommendations provided to remedy the issues before a tag is issued, your motivation to take immediate action will be stronger.

Getting the all-clear does not absolve you of your duties, however. Regular checks are the secret to maintaining a safe workplace. As such, we can provide you with a testing program that will ensure your compliance. We’ll even send you reminders when the time comes to recheck all of your equipment.

Reducing Stress in the Workplace with Safe Test and Tag Services

You have enough on your plate to keep your business running and successful. Worrying about the viability of your electrical equipment is a stress that you do not need and one that can be so easily eliminated by tasking its care to professionals that will hold it to the highest standards.

At Jim’s Test and Tag, your safety is our business. Avail of a free, no-obligation quote from our helpful and friendly customer support team today. We know that delivering our test and tag service at your South Australia premises will negate the chances of wear and tear bringing about a potentially dangerous situation for your workers. We look forward to working with you soon.

Jim’s Test and Tag provides RCD & Fault Loop testing in Sydney, Melbourne, Perth, Hobart, Brisbane, Adelaide, Gold Coast as well as regional across Australia.

Read Less

Our Personnel

We’ve spent over 10 years in this business. We’ve taken this time to perfect our craft and to this day we continue growing and expanding. Our staff is technically trained and is able to keep our clients informed with their testing and tagging as we complete their inspections.

Why Choose Us?

Choosing a service provider shouldn’t be a daunting task, as long as you have a provider with a knowledgeable staff and a reputation you can trust. When tasked with testing and tagging, it’s important to use a service provider with the skill and equipment to ensure passing inspection. Jim’s Test & Tag has been a leading expert in this field for over 10 years and strives to provide you with the most comprehensive and efficient service.