RCD Testing & Safety Perth

Residual Current Device or RCD is basically a safety switch that is installed in a switch board to minimize the chances of an electrical hazard. The basic function of an RCD is to break the circuit if it detects an abnormal flow of current. RCD testing and safety Perth is a service offered by Jim’s Test & Tag which ensures that the RCDs installed in your workplace aren’t faulty and at the same time are functioning as they are supposed. Read More

Safety in the workplace is something that must be taken into consideration regularly and factored into the monthly schedule for any facilities manager. Countless staff and visitors will potentially pass through the doors of the building under your care during your tenure and so it is essential that you know the electrical systems in place pose no threat and are working at their optimum levels.

RCD Testing Perth

Here at Jim’s Test and Tag, we are the best in the business in terms of facilitating professional RCD testing in Perth, as well as across Australia. Our dedication to continued learning, strict adherence to the compliance laws and regulations and diligence in terms of the personnel that we hire to look after your electrical systems sets us apart from all others.

We engage in thorough testing before a tag is provided to any electrical equipment that requires our attention and we can also provide you with a testing program that will ensure your continued compliance over the months and years that follow. Our reminder service is a great way to ensure that you can plan and arrange times for our skilled team to revisit your premises, and this benefits you and those you are looking out through effective maintenance and testing.

Prevention is Better than the Cure

An RCD more commonly known as a safety switch prevents harm coming to those that come in contact with a faulty piece of equipment by immediately shutting down the power circuit and eliminating the possibility of a potentially fatal electric shock. In the workplace, the benefit of this device cannot be understated, and the team here at Jim’s Test and Tag encourage those concerned about the effectiveness of the RCD on their premises to get in touch with our team.

In terms of what might prompt concern on your part, it is often the case that an RCD is constantly tripping. While your immediate thoughts may jump to it being the problem and a fault lying in the device, the reality is that it is most likely an electrical appliance with a fault that is causing it to reset over and over.

However, prevention is better than the cure, and so it is always advised to get in touch with us here at Jim’s Test and Tag to schedule a visit. We are happy to provide a free quote for RCD testing in Perth and promise nothing less than a thorough investigation that will determine the exact cause of this sustained warning signal.

While homeowners can determine the source of the problem by disconnecting all electrical appliances and then connecting them one by one until the RCD trips again, this is most likely an impractical use of time and resources for those in a workplace. What’s more, with employee and visitor safety of paramount importance, having the professionals there as soon as possible reduces the risk of a costly accident occurring.  

Prioritising the Prevention of Electrical Faults

The team here at Jim’s Test and Tag believe that with appropriate timetables that facilitate regular testing and tagging of electrical equipment in place, business owners and facility managers can vastly reduce the risk of injury or accident in the workplace in this regard. While a handyman may seem like a quick solution to get your building up and running, the reality is that where an electrical issue remains unresolved, this could and likely will recur.

As such, there really is only one choice for those that need RCD testing in Perth, and that’s the professionals here at Jim’s Test and Tag. So, get in touch today and let’s prioritise the prevention of an electrical fault compromising your place of business.

Jim’s Test and Tag provides RCD & Fault Loop testing in Sydney, Melbourne, Perth, Hobart, Brisbane, Adelaide, Gold Coast as well as regional across Australia.

Read Less

Our RCD testing service checks the time in which the RCD trips. Ideally, an RCD needs to trip in a short period of time after detecting an imbalance in current flow to avert electrical hazards.

We have a very experienced and well trained team of technicians who perform RCD testing using the most advanced tools. This is done to ensure the accuracy of our test results.

Consequences of Ignoring RCD Testing and Safety Perth

RCD testing and safety Perth is not something you can ignore. Industry regulations in Australia require that you have your RCDs tested on a regular basis from a qualified technician. Failure to do so can land you in trouble with the authorities. Moreover, if RCDs are not tested regularly then they might malfunction and end up compromising the electrical safety of your workplace.

Pros of Choosing RCD Testing and Safety Perth

Choosing Jim’s Test & Tag RCD testing services will ensure that you have no trouble in complying with the electrical safety regulations of your industry. Moreover, you will also not have to worry about the safety of your workers and electrical appliances. Other pros include:

  • Cost saving
  • Early detection of faults
  • Peace of mind

Don’t wait, call Jim’s Test & Tag and take advantage of our services of RCD testing and safety Perth today.