OUR SERVICES

Testing and Tagging is the process of inspecting and testing all in service electrical equipment for personal safety. Each year hundreds of lives are saved due to timely testing and tagging of electrical equipment. This not only helps in saving lives, but also can reduce the risk of lengthy insurance claims in the event of a tragedy.

FREE QUOTE

Fire Extinguisher tests need to be done at least every 6 months. Fire Extinguishers are the easiest and fastest way of protecting you and your business when a fire occurs. Smoke alarms are now mandatory in dwellings across most Australian states, with reports that they can reduce house fire deaths by up to 60%., It’s critical to regularly get your smoke alarm and fire extinguishers tested properly.

FREE QUOTE

Even if you know where all the exits are located and all the emergency & exit lights seem to be in working order, regular testing and maintenance is the only way to minimise the risk of faulty emergency & exit lights in an emergency situation. Emergency & exit light testing is a 6-monthly legislative requirement,, which will ultimately help to increase the safety for employees and clients in your workplace.

FREE QUOTE

Whenever a microwave oven is turned on, radiation energy is produced causing the water in food to vibrate rapidly. This rapid vibration produces heat, which in turn cooks the food. The energy produced by a microwave oven can also penetrate through living tissue which is why exposure is harmful to our health.

FREE QUOTE

An RCD (Residual Current Device) is the industry term for a safety switch. An RCD’s main purpose is to prevent severe electrical shocks from occurring. An RCD acts as a life saving device; it detects and halts the power in an electrical socket preventing dangerous electric currents and fatal electric shocks. RCD’s are usually located on a switchboard but can be used portably. Every home and workplace should enlist in regular RCD safety switch testing to ensure they are working correctly.

FREE QUOTE

At Jim’s Test & Tag, our technicians provide earth fault loop impedance test services, designed to test the electrical earth of all power points and electrical installations and discover any faults within your electric circuit. In order to ensure you and your employees’ safety and the accuracy of our earth fault loop test results, we will also always test the power point we use for our portable appliance tester when we provide our other testing and tagging services.

FREE QUOTE

Test and Tag Port Macquarie

The safety of your electrical equipment is not something that you can take for granted. It needs to be tested regularly so that it remains safe after frequent use. Once your equipment has been inspected and tested, if it passes, it can be tagged to show that it is free from damage and safe to use. At Jim’s Test & Tag, we have over 10 years of experience in the business, building up our reputation and becoming a trusted test and tag service that many companies use. All of our staff are trained to be able to complete all of the technical jobs correctly and to keep our clients informed about every aspect of the inspections we complete as we test and tag your electrical equipment. Read More

Do you need to test and tag your electrical equipment in Port Macquarie?

We provide a range of testing services because we understand how important it is to keep your business at OHS compliance so that it is safe for your employees and any visitors on your premises. All of your electrical equipment needs to be inspected and tested at frequent intervals so that you can be sure that it is safe to use and has no damage. Some of the services we provide are:

  • Testing & Tagging Electrical Equipment – This is the inspection and testing of electrical equipment at different intervals depending on the type of equipment and the kind of work environment. Equipment used in a hostile working environment, such as an industrial environment where it is more likely that the equipment will get damaged, needs to be tested more often than equipment in a non-hostile operating environment.
  • Fire Protection Testing – Your fire extinguishers must be tested at least every 6 months as they are a vital component for protecting you, your employees, and your business if a fire were to occur. Your smoke detectors also need to be checked as they are effective at reducing the amount of fire-related deaths in buildings. We will also check that your other fire protective items, such as fire blankets, are working correctly so that if you ever need them, they can protect you properly.
  • Emergency Lighting and Exit Sign Testing – In an emergency where all the power was cut, you need to have emergency lighting so that you can safely reach the exit and evacuate safely. We can perform tests on your emergency lighting so that you know that they are in working order should you ever need them.
  • Earth-Fault Loop Impedance – This service is designed to test and discover any faults to the electrical earth of all of your electrical installations and power points. We test this using our portable appliance tester so that we can ensure the accuracy of our test results.

Jim’s Test and Tag in Port Macquarie

For all your testing and tagging needs, choose Jim’s Test & Tag. With over 10 years of experience in the business, and technicians with high-quality training, you can ensure that you will be picking the best service provider to ensure the safety of your employees and your business.

Get all of your electrical equipment tested and tagged by the reliable team at Jim’s Test & Tag.

Read Less

Our Personnel

We’ve spent over 10 years in this business. We’ve taken this time to perfect our craft and to this day we continue growing and expanding. Our staff is technically trained and is able to keep our clients informed with their testing and tagging as we complete their inspections.

Why Choose Us?

Choosing a service provider shouldn’t be a daunting task, as long as you have a provider with a knowledgeable staff and a reputation you can trust. When tasked with testing and tagging, it’s important to use a service provider with the skill and equipment to ensure passing inspection. Jim’s Test & Tag has been a leading expert in this field for over 10 years and strives to provide you with the most comprehensive and efficient service.